Invaderboat
Cadet
- Joined
- Jul 27, 2011
- Messages
- 12
Hi all we have just fitted a Honda BF35A engine today to our boat.
We have attached our battery power cables to the starter solenoid & earthed at the starter motor.
We attached the engine kill/emergency switch connector then placed the choke/fast idle to the start position & turned the ignition key, nothing happened.
The oil & water indicators did not illuminate on the control box when the ignition key was turned & nothing from the starter motor.
Please advise as to what (if anything) else should be done, or not?
With thanks Invader.
We have attached our battery power cables to the starter solenoid & earthed at the starter motor.
We attached the engine kill/emergency switch connector then placed the choke/fast idle to the start position & turned the ignition key, nothing happened.
The oil & water indicators did not illuminate on the control box when the ignition key was turned & nothing from the starter motor.
Please advise as to what (if anything) else should be done, or not?
With thanks Invader.