m_sherman211
Petty Officer 3rd Class
- Joined
- Dec 31, 2010
- Messages
- 85
Got an ancient chrysler 55 outboard.
Motor would turn over but not start. I changed all the gas and pulled apart the carb. Cleaned it out with carb cleaner and compressed air.
Put it all back together and the motor starts and will run but you have to crack the throttle a bit but it will not idle.
Any suggestions on what to do next.
I don't know if theres an idle screw on carb or not.
Motor would turn over but not start. I changed all the gas and pulled apart the carb. Cleaned it out with carb cleaner and compressed air.
Put it all back together and the motor starts and will run but you have to crack the throttle a bit but it will not idle.
Any suggestions on what to do next.
I don't know if theres an idle screw on carb or not.