35 hp evenrude #35802R Upper Driveshaft Seals

jasper60103

Commander
Joined
Sep 18, 2008
Messages
2,055
Re: 35 hp evenrude #35802R Upper Driveshaft Seals

What is the best way to replace the upper Driveshaft seals

If you're referring to part #23, I had success prying it out with a seal puller. I've heard others say a flat blade screw driver works as well. Be careful not to gouge or scrape the side walls. Good luck.

http://www.marineengine.com/parts/j...manufacturer=Evinrude&section=Gearcase-+35+Hp


SDC12050.jpg
 

jrboat2011

Seaman Apprentice
Joined
Mar 16, 2011
Messages
36
Re: 35 hp evenrude #35802R Upper Driveshaft Seals

do I need to pull out drive shaft,
 

jasper60103

Commander
Joined
Sep 18, 2008
Messages
2,055
Re: 35 hp evenrude #35802R Upper Driveshaft Seals

do I need to pull out drive shaft,

Yes, you have remove the drive shaft. Also, this would be a convenient time to replace the water pump or impeller if it hasn't been done in a while.
 

jrboat2011

Seaman Apprentice
Joined
Mar 16, 2011
Messages
36
Re: 35 hp evenrude #35802R Upper Driveshaft Seals

will the drive shaft just pull out, or do i have to take the whole lower unit guts apart,
 
Top