Removing lower unit on 1974 34 hp Evinrude

jrboat2011

Seaman Apprentice
Joined
Mar 16, 2011
Messages
36
I have followed the general steps to removing the lower unit, but I can?t get the lower unit to come a part from the upper unit. I have removed the shift linkage bolt in the upper unit, as well as the four bolts on the side and the nut on the front stud holding the lower unit on. The lower unit seems to be stuck on the stud in the front.
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: Removing lower unit on 1974 34 hp Evinrude

You may want to try some heat in the stud area with a mapp gas torch. Then some small wedges between the g/c and exhaust housing.
 

crowekamp12

Recruit
Joined
May 29, 2008
Messages
3
Re: Removing lower unit on 1974 34 hp Evinrude

under the bolt in back for the wing there it a hother bolt up inside you need to use a flash light to see it it is 1/2 inch
 

jrboat2011

Seaman Apprentice
Joined
Mar 16, 2011
Messages
36
Re: Removing lower unit on 1974 34 hp Evinrude

thank you, that worked fine,
 
Top