1999 Larson 186 SEI bilge wiring.

B

bigbadbowtie

Cadet
Joined
Jul 5, 2011
Messages
14
Ok folks,I bought a very nice condition 1999 186 SEI Travis Edition with 150 hours on it. We have put about 10 hours on it so far with no major issues.
This boat came with an Attwood v450 bilge pump. Its not working. I can turn on the bilge switch and get no noise from the pump.
I also checked the red/black wires feeding the pump and 0 volts.

My question is, does this boat have a fuse box or is the fuse in line from the switch up front??


Thanks
 
AZSenza

AZSenza

Chief Petty Officer
Joined
Mar 11, 2008
Messages
521
Re: 1999 Larson 186 SEI bilge wiring.

Should be an inline, mines close to the battery, although it could have one in a fuse panel. Follow the wires!
 
B

bigbadbowtie

Cadet
Joined
Jul 5, 2011
Messages
14
Re: 1999 Larson 186 SEI bilge wiring.

I have not had time to look at it in depth and trace any wires. I do know I have power coming out of the switch when I turn it on. Its just not making it back to the pump. The issues is between the switch and bilge. Ill have time hopefully Wed to do more troubleshooting.

Thanks for the info. Ill check back by the battery 1st.
 
You must log in or register to reply here.
Top