2 tan wires 1990 225 v6 evinrude

rusty bolts

Petty Officer 2nd Class
Joined
Aug 20, 2004
Messages
148
Hello
there are two tan wires coming from the motor one goes to the warning horn the other o one goes ? I had the whole boat apart few years ago to fix the floor and have just about have it ready but and cant seem to remember where it goes. one comes from the vro and the other from the power pack? the warning horn does not seem to work when i ground out the wire on the head they have continuity. Looking at the wiring diagram I only see one tan going to the warning horn as one does thanks RB
 

CretePumper

Cadet
Joined
Apr 29, 2011
Messages
9
Re: 2 tan wires 1990 225 v6 evinrude

Temperature switch, low Oil sensor and Vacuum switch (Tan) all tie together for warning horn, one lead to horn
 

rusty bolts

Petty Officer 2nd Class
Joined
Aug 20, 2004
Messages
148
Re: 2 tan wires 1990 225 v6 evinrude

thanks for the info
the tan wire will be tied into the ing switch ?or some other way ? the switch and binical is of 1986 vintage .
 

CretePumper

Cadet
Joined
Apr 29, 2011
Messages
9
Re: 2 tan wires 1990 225 v6 evinrude

Tan from sensors and Purple from ignition switch go to warning horn.
 

rusty bolts

Petty Officer 2nd Class
Joined
Aug 20, 2004
Messages
148
Re: 2 tan wires 1990 225 v6 evinrude

the other tan wire must go to a temp gauge. i think that is it
 
Top