Michigan Wheel Apollo Prop on a 98 120HP Force Motor

Frank Acampora

Frank Acampora

Supreme Mariner
Joined
Jan 19, 2007
Messages
12,004
Re: Michigan Wheel Apollo Prop on a 98 120HP Force Motor

You have a 15 spline mercury lower unit. You need to measure the diameter of the gearcase to see if the prop will fit. the gearcase will either be 4 1/4 or 4 inch nominal size. I could not call up the 102 hub, but if it fits mercs, then it should fit your Force.
 
Frank Acampora

Frank Acampora

Supreme Mariner
Joined
Jan 19, 2007
Messages
12,004
Re: Michigan Wheel Apollo Prop on a 98 120HP Force Motor

I have used that hub kit on an older Force 15 spline lower unit with a Vortex prop. The prop needed to be modified just slightly to clear the anode bolted inside the gearcase. In your case, there is no separate anode and the gearcase is all Merc. Assuming the Apollo prop is 4 1/4 diameter, the prop and hub should work with no problems
 
Bustedknuckle84

Bustedknuckle84

Chief Petty Officer
Joined
Sep 29, 2010
Messages
421
Re: Michigan Wheel Apollo Prop on a 98 120HP Force Motor

Thanks for your input Frank, always good info from ya !
 
You must log in or register to reply here.
Top