1999 50hp not getting power in forward gear

nitro99

Recruit
Joined
Aug 15, 2010
Messages
2
When I try to accelerate in forward my motor will not go above 3000rpm. In neutral and reverse it does fine...only in forward. And sometimes when I'm idling in forward it will knock and rev up for a second. Motor problem or lower unit? Any ideas?
Also, when I put it in reverse (with the motor off) I can't spin the prop at all. When I put it in forward, the prop will not spin left but it spins freely to the right making a clicking sound as it spins. Shouldn't it not move at all?
 
M

Maxz695

Guest
Re: 1999 50hp not getting power in forward gear

The prop is not supposed to move in either direction in reverse I learned this the hard way. I would also recommend a link and synch. From what you describe sound like you cable adjustments are somewhat off. I cant be sure of any of this so wait for more replys to help you with this problem and have a great day. You may have streched cables as well not allowing the carb to open up all the way check the buterfly with the throttle open full and see if it opening 100%
 
Top