adding kicker need controls

B

bansheetaz

Cadet
Joined
Dec 1, 2005
Messages
20
howdy folks. im looking to add a 1967 6hp evinrude to my boat as a kicker motor. i have a 74 johnson 115 for the main engine and im looking to connect the steering, shifter and throttle if possible. it looks like there is a spot for a steering connector on the front of the 6 horse engine that looks like a 1/4 turn connector or camlock. the shift lever also has this connector on it. the throttle looks like there is a spot for a bracket and then a peg for a cable on the tiller arm.

can anyone point me in the direction to find the linkages that i might need for this?

i appreciate anyones help.

thanks
 
JSGOLD

JSGOLD

Chief Petty Officer
Joined
Sep 22, 2009
Messages
609
Re: adding kicker need controls

http://cgi.ebay.com/ebaymotors/John...at_Parts_Accessories_Gear&hash=item3f04a36cf8

http://cgi.ebay.com/ebaymotors/evin...at_Parts_Accessories_Gear&hash=item2c58b68d05

here is what I have on my 76' Starcraft with 55hp evinrude and 5.5 kicker(61')
I added second control, type 400 cables and the clips and end pcs you see in the pics.

this is the connectors apart from the cables.... I may be wrong but hard if not impossible to run both motors from same control box although dual control units are out there. On mine though it was not possible. The steering kit is sold here oo Iboats, and they may sell the connector kits too. The control box, ebay.
http://cgi.ebay.com/Connection-Kits...QitemZ200448740461QQptZLHQ5fDefaultDomainQ5f0
 
Last edited:
JSGOLD

JSGOLD

Chief Petty Officer
Joined
Sep 22, 2009
Messages
609
Re: adding kicker need controls

steering kit....Iboats has others as well. Check them on the other connectors as well, support them when possible. Their cables are very competitive as well.
 
You must log in or register to reply here.
Top