Stall

T

TiredoleBoy

Petty Officer 2nd Class
Joined
Jul 11, 2010
Messages
172
Ok the boats is basically together now. But when I place the selector in neutral from drive or reverse it acts like it starts to stall for a moment. I think the lower shift cable is adjusted correctly. It goes into reverse and forward. Could this be the shift interrupter needing tweaking from the upper cable?
Oh and I puled a stupid one today, when testing it for leaks, I forgot to put the damn plug into the boat. It was still trailered though and never left dock.:redface:
 
Don S

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: Stall

Would sure help if we knew what you were working on.
 
T

TiredoleBoy

Petty Officer 2nd Class
Joined
Jul 11, 2010
Messages
172
Re: Stall

Sorry Sometimes I assume too much.
1988 Barreta Success with a 3.7. Just did a bellows job and lower shift cable to it.
 
zbnutcase

zbnutcase

Commander
Joined
Sep 19, 2009
Messages
2,055
Re: Stall

The engine WILL sound like its gonna stall coming out of gear back to neutral; thats how the shift interrupt works.
 
Bt Doctur

Bt Doctur

Supreme Mariner
Joined
Aug 29, 2004
Messages
19,237
Re: Stall

works like that only in the water with a load on the prop, will not do that on muffs unless there is a problem with the shift cable binding.
 
T

TiredoleBoy

Petty Officer 2nd Class
Joined
Jul 11, 2010
Messages
172
Re: Stall

Thanks that is what I was wondering, cause it has never done this before. Only since I installed the new cable and adjusted it.
 
You must log in or register to reply here.
Top