1959 #50518 50 hp starting problem?

H

hdjohnny

Recruit
Joined
Jul 29, 2010
Messages
3
I have a model 50518 50 hp and wondering if anyone could help? This was my dad's boat and it ran great but it's been parked for 4-5 years outside. It turns over but will not start. I don't think it's getting any fire to the plugs. It looks like it has a mag that advances timing and rod that pushes carbs for for more speed?
 
JB

JB

Honorary Moderator Emeritus
Joined
Mar 25, 2001
Messages
45,907
Re: 1959 #50518 50 hp starting problem?

Top Secret File ^^^.
 
C

Chris1956

Supreme Mariner
Joined
Mar 25, 2004
Messages
28,902
Re: 1959 #50518 50 hp starting problem?

Remove the three screws on the distributor pully cover and clean and adjust the points to .020" gap. You will need to align the flywheel timing wark for the first set of point adjustment. Next turn the flywheel about 90* and set the other point gap.

If that doesn't restore spark, make sure the black killer wire on the distributor is disconnected. If that doesn't get it, you probably should inspect the coil for cracks and replace the condenser. The coil is contained within the distributor body.
 
H

hdjohnny

Recruit
Joined
Jul 29, 2010
Messages
3
Re: 1959 #50518 50 hp starting problem?

Chris1956 - thanks for your help. Reset points and it started right up.
Thanks!
 
You must log in or register to reply here.
Top