johnson 9.5 shorting switch

H

hackney317

Recruit
Joined
Jul 18, 2010
Messages
2
I just aquired a 1971 johnson 9.5 hp. The shorting switch has been disconnected. Anyone have a wiring diagram or info so I can hook it back up?

Also there are 2 wires with connectors comming from under the flywheel on the left side (looking at the front), just wonder what they might be for.

Thanks
 
E

ezeke

Supreme Mariner
Joined
Sep 19, 2003
Messages
12,532
Re: johnson 9.5 shorting switch

hackney317 said:
I just aquired a 1971 johnson 9.5 hp. The shorting switch has been disconnected. Anyone have a wiring diagram or info so I can hook it back up?

Also there are 2 wires with connectors comming from under the flywheel on the left side (looking at the front), just wonder what they might be for.

Thanks
Click to expand...

The two wires from under the flywheel are for the shorting switch; if it's disconnected, it's probably because the switch wires have lost their covering and are shorting out.

Replacement switches are available through your authorized BRP/Evinrude dealer part #0379638.

You can also use a lanyard type universal switch: http://www.iboats.com/Seadog-Univer...22177724--**********.801491669--view_id.39677
 
H

hackney317

Recruit
Joined
Jul 18, 2010
Messages
2
Re: johnson 9.5 shorting switch

I thought that might be the case but figured someone on here would know for sure. Thanks for the quick reply.
 
You must log in or register to reply here.
Top