Beep, Beep, Help!

johnmcdonaljr

Recruit
Joined
May 2, 2010
Messages
5
Ive got a Honda BF150 4 stroke that will start initially but engine light will come on(not oil or temp. light) So I shut the motor down and then try to restart, motor will not start, all I get is a backfire. Does not overheat, compression checked good, oil level good and tried moving the trim to the top and bottom. Anyone seen this problem or have any ideas?
 

johnmcdonaljr

Recruit
Joined
May 2, 2010
Messages
5
Re: Beep, Beep, Help!

OK, I figured out how to short the plug to make the engine light blink out the codes. I've got seven.

#1 I need to know what the codes mean. Does anybody have that info. I'd hate to buy the manual for $150 and only use it once.

#2 I need to know how to reset the ECM so I dont keep reading the same codes.

I'll keep the post updated any help would very much be appreciated. Thanks.
 

johnmcdonaljr

Recruit
Joined
May 2, 2010
Messages
5
Re: Beep, Beep, Help!

i finally reset the ECM, let me know if anyone needs me to explain how. Now that its reset I rea only one code. 8 quick blinks. Does anyone no what that means?
 
Top