thrillhouse700
Senior Chief Petty Officer
- Joined
- Aug 5, 2009
- Messages
- 778
So we are in the middle of our boat resto. We have the boat off the trailer and prepping it for paint. We figured this would be a good time to change out some parts on the trailer. We have a 17.5 foot tri-hull, on a 4 bunk and 3 roller trailer. The three rollers are flat rubber style like this....
When looking to buy new rollers I found all of these flat style ones say it is a "side roller" The 2 rear rollers need to be flat because of the tri-hull design, but the front roller sits on the keel. Is a flat roller ok here?
When looking to buy new rollers I found all of these flat style ones say it is a "side roller" The 2 rear rollers need to be flat because of the tri-hull design, but the front roller sits on the keel. Is a flat roller ok here?
