90 hp Force Trim how to fill

getmoney

getmoney

Recruit
Joined
Aug 5, 2009
Messages
2
I have a 90 hp Force motor. I have 2 bolts in the top that expose a ton of copper wires, and what I believe to be the bleeder in the side. When my motor goes up, it eventually falls back down. My mechanic told me to fill it but that brings up these questions:

Where do I fill it from?

What do I fill it with?

And where do I fill it too??

I took those top bolts off, and dont know if that whole thing is supposed to be filled or what. Any manuals for a 90 Bayliner capri, and a 90 hp Force motor, diagrams or anything would be helpful. Please PM me, or email shaun.mauger@gmail.com


Thanks for all the help!!!!
 
roscoe

roscoe

Supreme Mariner
Joined
Oct 30, 2002
Messages
21,667
Re: 90 hp Force Trim how to fill

Do not fill from the top where the wires are.

Exactly how you fill it depends on which model year you have.
What year is your motor.

Fill the reservoir by removing the 3/4" plug on the side.

Fill with whatever fluid is in there.
It could be 30 wt oil, transmission fluid, or hydraulic fluid. What does it look like?
 
You must log in or register to reply here.
Top