I just rebuilt my carb (2300 series holly 2bb) for my 3.o OMC. Now it is running way to rich and is sputtering at idle and hard to keep running. i have adjusted the air fuel screws from one extreme to the other and everything in between with no help. I adjusted the float according to the factory manual and went from one extreme to another on it too. I have taken it apart about four times to look at the gaskets making sure all ventures and holes were not blocked. took out all needles and seats again to make sure there was no debris. blew out all air and fuel holes with my compressor during the build. This is not the first carb i have built but this one seems to be giving me the biggest problems. Thanks in advance for the help.
