1986 90hp carb help

C

Chumlee

Cadet
Joined
Jul 4, 2009
Messages
19
I was taking carbs off motor to install kit. Upon taking top carb off, I was taking hose off of nipple on the bottom of the bowl. Plastic nipple broke off flush. Upon looking on shop evinrude diagram and parts list, I dont see any numbers for replacement. I have not yet disassembled carbs as of yet. Is this plastic nipple replaceable or do I have to replace lower float chamber?

Any suggestions are very much appreciated. Thanks a million
 
david_r

david_r

Lieutenant Junior Grade
Joined
Aug 11, 2008
Messages
1,118
Re: 1986 90hp carb help

i would say if it dont have a # listing then its part of the carb bowl
 
david_r

david_r

Lieutenant Junior Grade
Joined
Aug 11, 2008
Messages
1,118
Re: 1986 90hp carb help

strange the lower is more expensive than the upper.
 
C

Chumlee

Cadet
Joined
Jul 4, 2009
Messages
19
Re: 1986 90hp carb help

If i have to buy one, I may try to drill and tap for new fitting. If it works, it works. If it doesnt work, what have I got to lose.
Yeah, seen that the lower was higher priced then the upper. To me they both looked the same. Dunno why one is higher then the other.
 
tashasdaddy

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: 1986 90hp carb help

i have tried to drill and tap, but not successfully. i replaced my bowl. hunt a carb on ebay.
 
You must log in or register to reply here.
Top