corner molding for pontoon

Pontoonfun · #1 July 22nd, 2009, 12:49 AM

I have a 89' pontoon sun tracker need {corner caps right angle and nose}, any web sites reccomendations to purchase from.

OldePharte · #2 July 22nd, 2009, 11:11 AM

You may try an older marine supply store near you.

Although I can not vouch for them, you may want to look at -
http://www.restorepontoon.com/pontoo...rdware-c10.htm

or

http://www.pontoonspecialists.com/c-...p-casting.aspx

EGlideRider · #3 July 22nd, 2009, 11:23 AM

Tracker is still in business. I would order from them.

TrackerMarine.com

Jeep Man · #4 July 22nd, 2009, 07:25 PM

Many suppliers carry them, West Marine, Pontoon Stuff, probably iboats, etc. You can probably find a close match or replace all 4.

5150abf · #5 July 23rd, 2009, 05:29 AM

iboats of coarse and they have the best price!

pugbro · #6 July 27th, 2009, 10:42 AM

I have a 89 Bass Tracker Pontoon that i have just completed a complete rebuild and I contacted my local marina and they ordered the stock corners from Tracker...it has been about 8 months ago but I think they were only around $50 for all four....Good Luck

chrisg · #7 July 28th, 2009, 05:56 PM

I have the same issue. the sites listed above don't have the right size. I was thinking if I need to take a hacksaw to a set to get them to fit. What are they made of? can you cut them to size?

Pontoonfun · #8 August 3rd, 2009, 02:57 AM

Their made of black black plastic.

EricStarr · #9 August 7th, 2009, 01:09 AM

have a 2000 suntracker party barge i got my cornor caps from www.everythingpontoon.com fit perfectly

gtownky · #10 August 9th, 2009, 07:11 AM

I went to a fab shop and had a new front piece made out of thick alum.