I Need To Use Gluvit On The Bottom Of My Boat To Seal Off Some Leaky Rivets. Can It Be Applied With The Boat Up Right Or Do I Need To Have It Turned Over?
It is designed to be used inside the hull but will also work on the outside. As stated above it "creeps" ........ if you were to apply it under a surface it would not work properly if at all.
Best to re-buck the offending rivets first then apply.
It is designed to be used inside the hull but will also work on the outside. As stated above it "creeps" ........ if you were to apply it under a surface it would not work properly if at all.
Best to re-buck the offending rivets first then apply.
Hey Bob can you elaborate on what re-bucking the rivets is exactly?
I've got 3-4 that are still bleeding water depending on how loaded the boat is at the time. I haven't done much to the rivets but I'm considering hammering with some heavy metal on the other side- is this what you refer to?
