What is your prop pitch on your toon?

I have a 24ft pontoon with a 115 on the back, I was curious as to what most people have for there props on there toons. Do you have a 3 or 4 blade and waht size motors get "you" the best results. I am looking to get a happy medium prop. I want something that gets out of the water good, but also won't over rev the motor when cruising. Yes I know I should give you details on what RPM's I am running now, but all I want is a couple of experienced prop responses from people who are currently using the prop.. I know what I have might be different to the guy next to me, but I also want to know is the 4 blade better than 3, if so why or why not? Thanks for the help!

Re: What is your prop pitch on your toon?

I also have 24ft with merc 115 currently run 14 x 13 3 blade Turning Point Hustler.

I have had toon out twice fully loaded and get 5000 rpm at wot.

Guessing 26-28 mph will verify this spring with gps.

Re: What is your prop pitch on your toon?

11x11 - 40HP Suzy 4-stroke on 18 ft Misty Harbor. That said, there is only one prop for your pontoon and it generally isn't what someone else has. The correct prop (whether 3 or 4 blade) allows the engine to rev to the upper end of the manufacturers recommended RPM band at wide open throttle with an average load. Speed will be whatever that prop produces. If the prop is wrong at WOT it is wrong at all other throttle and load settings. Pontoons generally perform best with pontoon specific props. Three blades can work as well as four blades but a four blade, elephant ear prop (pontoon specific) works very well and can provide more thrust in reverse so docking is more controlable.

Re: What is your prop pitch on your toon?

25 foot JC triple tube with a Honda 115 and a Stock 14x13 3blade prop. 5800rpm WOT and 26-27mph 30 gal of fuel 3 adults one kid.

Re: What is your prop pitch on your toon?

25' pontoon with 90hp Nissan turning an 11p prop. I get ~5000RPM wot with 8 people on board.

Re: What is your prop pitch on your toon?

14x10 runs at 6000 RPM.
14x11 runs at 5500 RPM.

3-Blades.

Re: What is your prop pitch on your toon?

22' party barge w/ 135hp I/O
three blade 15x15.5

This is how it came from the dealership though - I don't think I'll be sticking with this.

Re: What is your prop pitch on your toon?

On My 22' Avalon I use a 14 x 13 pitch 3 blade with a 115 hp Mercury 4 stroke. I get about 5200 WOT. I tried an 11 pitch, but get too much cavitation.
27 MPH GPS with just me and the wife on board.

Re: What is your prop pitch on your toon?

I have a 1991, LOWES model 202 for Johnson Pontoon boat with a 1983, 70 horsepower Johnson that has a 13 3/4 X 13 pontoon prop on it that pushes my 20 foot pontoon boat at 23 MPH with me and my wife at 5700 RPM WOT.

Re: What is your prop pitch on your toon?

newbie here.......what prop pitch for a 50 hp johnson 2 cycle on a 21' toon???