iboats - The #1 Store For Everything Boating
 
  #1  
Old January 5th, 2009, 12:16 PM
tonyg11780 tonyg11780 is offline
Petty Officer 3rd Class
 
Join Date: Mar 2008
Location: Brandon, MS
Posts: 75
Send a message via Yahoo to tonyg11780
Default Baretta Boats

I recently stumbled upon a 1989 Baretta 21? cuddy cabin with a straight six mercruiser that was just put in last summer. He is asking 1850 for the boat, and it looks to be in pretty decent condition. I have never been around barettas and would like to know a few things. First, is the boat worth the money if the floor and transom are solid? How do these boats run out? Is there anything particular I need to know before I tackle this specific boat?

Thank you for any advice you can provide me...

Tony G.
__________________
Holy Crap! Did I say that out loud?
Reply With Quote
  #2  
Old January 6th, 2009, 10:46 AM
Bob_VT's Avatar
Bob_VT Bob_VT is offline
Moderator
 
Join Date: May 2001
Location: Castleton, VT USA
Posts: 11,519
Default Re: Baretta Boats

How much experiance do you have in inspecting a boat? Can you water test it?

$1850 does not sound bad but if there are hidden problems it could be terrible.

Post a request for help if you need it in Dockside Chat looking for other members in your area to lend a hand at looking at it.
__________________
"When you see yourself doing something badly and nobody’s bothering to tell you anymore, that’s a very bad place to be. Your critics are your ones telling you they still love you and care." Randy Pausch 1960-2008 The Last Lecture

SpinnerBait_Nut's Member Map Link Please add yourself http://www.frappr.com/iboats
Reply With Quote
  #3  
Old January 24th, 2009, 09:59 AM
tonyg11780 tonyg11780 is offline
Petty Officer 3rd Class
 
Join Date: Mar 2008
Location: Brandon, MS
Posts: 75
Send a message via Yahoo to tonyg11780
Default Re: Baretta Boats

I was a boat mechanic for a a number of years. I recently went and looked at the boat. The floor is weak, but everything else looks sound. He has come down to 1000.00 dollars on it now. Below is a link to the ebay page that it had.




http://cgi.ebay.com/ebaymotors/21-ba...cmdZV iewItem
__________________
Holy Crap! Did I say that out loud?
Reply With Quote
  #4  
Old January 28th, 2009, 10:42 AM
JaSla74's Avatar
JaSla74 JaSla74 is offline
Petty Officer 1st Class
 
Join Date: Oct 2008
Location: St. Augustine, Florida
Posts: 315
Default Re: Baretta Boats

If the floor is weak you're probably looking at a complete rebuild (see my thread). I paid a grand for mine & had I known the floor was in such bad condition I would not have paid as much. If the engine/outdrive are in good shape I'd only give 500 max & would be hesitate about that. The seats don't look original and most likely the side panels are gone too. I've seen that boat listed before & it looks like a lot of work.

As for my Baretta it handled very well before I tore her apart. Luckily my engine & drive are in great shape.
Reply With Quote
  #5  
Old January 28th, 2009, 11:05 AM
Bob_VT's Avatar
Bob_VT Bob_VT is offline
Moderator
 
Join Date: May 2001
Location: Castleton, VT USA
Posts: 11,519
Default Re: Baretta Boats

I don't care for the outdrive being tied up..... I bet there are mechanical problems too
__________________
"When you see yourself doing something badly and nobody’s bothering to tell you anymore, that’s a very bad place to be. Your critics are your ones telling you they still love you and care." Randy Pausch 1960-2008 The Last Lecture

SpinnerBait_Nut's Member Map Link Please add yourself http://www.frappr.com/iboats
Reply With Quote
  #6  
Old March 8th, 2009, 07:44 PM
tonyg11780 tonyg11780 is offline
Petty Officer 3rd Class
 
Join Date: Mar 2008
Location: Brandon, MS
Posts: 75
Send a message via Yahoo to tonyg11780
Default Re: Baretta Boats

Well, the boat is still there. He has gone down to a grand, and I bet I could get it for less. The floor is rotten in the middle, and I bet that I would have to rip it all up and replace the stringers. The transom seems to be solid. The outdrive is tied up becauset he solenoid, I can tell that much. I would be happy to put a floor and stringers in it, and do some cosmetic and light mechanical work. The engine runs smooth. Can anyone tell me what kind of Baretta that is? He says its 21', but it would be a big 21, looks to me more like 22 without putting a tape to it. If I dont mind installing stringers and a floor, and doing some light mechanical and cosmetic....would it be worth 750?

Thanks,
TonyG
__________________
Holy Crap! Did I say that out loud?
Reply With Quote
  #7  
Old March 9th, 2009, 11:30 AM
JaSla74's Avatar
JaSla74 JaSla74 is offline
Petty Officer 1st Class
 
Join Date: Oct 2008
Location: St. Augustine, Florida
Posts: 315
Default Re: Baretta Boats

If the outdrive & motor are in good condition then I think 750 is not too bad. I'd go in thinking worse case scenario and have a realistic budget in mind. I posted a brochure under this link & it looks like the model you're looking at is on the first page (if my memory serves me correctly).
Reply With Quote
  #8  
Old March 19th, 2009, 12:50 PM
JaSla74's Avatar
JaSla74 JaSla74 is offline
Petty Officer 1st Class
 
Join Date: Oct 2008
Location: St. Augustine, Florida
Posts: 315
Default Re: Baretta Boats

Did you pick it up, or pass on it over?
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
what? a Baretta forum?? cm5408 Baretta Boats 6 April 1st, 2008 01:59 PM
1979 Baretta PondTunes Boat Topics and Questions (not engine topics) 2 October 8th, 2007 06:23 PM
I also have a Baretta LeeRobertE Baretta Boats 1 June 11th, 2007 10:45 PM
Baretta Boats 12121956 Suggest a Boat Manufacturer Forum 0 July 14th, 2006 01:18 AM
Baretta Boats 12121956 Suggest a Boat Manufacturer Forum 0 July 14th, 2006 01:17 AM

iboats Forum Directory
Over 100,000 forum posts organized by topic
Outboard Motor Topics
Mercury Outboards
Johnson Outboards
Evinrude Outboards
Force Outboards
Yamaha Outboards
Mariner Outboards
Suzuki Outboards
Honda Outboards
Chrysler Outboards
Tohatsu Outboards
Nissan Outboards
Outboard Motors: non-repair
Vintage Outboards

I/O and Inboard Topics
MerCruiser
OMC I/O, Inboard
Volvo Penta

Propeller Help
Boat Propellers

Boat Repair and Products
Boat Building and Repair
Fiberglass Boat Repair
Marine Electronics
Boat Trailers and Towing
Boat Names
Boat Covers
Boat Parts

Boating Activities Talk
Boating Topics and Questions
Boating Activities and Destinations
Boating Blunders
Boat Shows
Wakeboarding
Water Skiing

Fishing Discussions
Freshwater Fishing
Saltwater Fishing

Boat Type Topics
Aluminum Boats
Bass Boats
Bowrider Boats
Center Console Boats
Cruiser Boats
Cuddy Cabin Boats
Deckboats
Fishing Boats
Fish and Ski Boats
Houseboats
Jet Boats
Jon Boats
Pontoon Boats
Powerboats
PWC Forum
Ski Boats
New Boats
Used Boats

Boat Manufacturers
Boats 250+ Manufacturers
Bayliner Boats
Sea Ray Boats
Zodiac Boats



Outboards

Power Heads

Lower Units

Propellers

Inflatable Boats

Boat Manuals

Engine Parts

All times are GMT -4. The time now is 12:51 PM.