bilge pump

E

edtalusan

Recruit
Joined
Aug 12, 2008
Messages
1
this is my first post
i have a 1989 17.5 glassmaster center console w/
a 88hp outboard, 1. what are the 2 holes w/ the flap in back
of the boat straddling the drain the plugs?
2. where can i get the manual for the said boat, i have the manual
for the motor? 3. how do i replaced the bilge pump and where is it
located? I am handy, i have serviced the carbs already and replaced
the ignition switch (just to let you know, i am handy
thanks for the help
 
jevery

jevery

Chief Petty Officer
Joined
Jun 16, 2006
Messages
538
Re: bilge pump

I?m guessing the ?holes with the flap? are scuppers. Do they look like this?

http://www.iboats.com/Perko_Cockpit...218586383--**********.961408468--view_id.3638

One-way valves usually in a splashwell to drain water.

I?d contact Glassmaster directly about a manual. If they cannot help, I doubt you?ll find one.

Bilge pump will be at the lowest level of the hull right near the stern. Should be able to access the area through an opening or a hatch. Once you find it, replacement is relatively straight forward.
 
Silvertip

Silvertip

Supreme Mariner
Joined
Sep 22, 2003
Messages
28,771
Re: bilge pump

To locate the bilge pump, follow the drain line from the overboard fitting in the hull.
 
You must log in or register to reply here.
Top