Ehaust bellow change w/o drive removal?

T

toxicant

Recruit
Joined
Apr 30, 2007
Messages
1
I have a couple of MR drives I had rebuilt a few years ago and when I re-installed them the bellows for the exhaust looked fine. Now they are rotten and I need to replace them.

Is it possible to replace those bellows without pulling the drives?

Twin 470s with MR drives. '66 Bertram.

Thanks !
 
jerryjerry05

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
18,196
Re: Ehaust bellow change w/o drive removal?

Yes it can be done.Don't waste your time with the old style bellows there is a newer kind that fits into the transom assy.It doesn't connect at the drive..Any parts guy should be able to get this.
18-2760 Sierra part# It's available on this site.Jerry
 
Bondo

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,448
Re: Ehaust bellow change w/o drive removal?

Ayuh,....

I Agree,....

Loose the Bellows,+go with the Tubes......
 
Don S

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: Ehaust bellow change w/o drive removal?

You do realize that pulling the drive for yearly maintenance is something that really needs to be done. Sounds like you haven't pulled the drives since they were installed and don't want to or plan to.
 
JustJason

JustJason

Vice Admiral
Joined
Aug 27, 2007
Messages
5,372
Re: Ehaust bellow change w/o drive removal?

twin 470's????? that's double tha trouble....
 
You must log in or register to reply here.
Top