40 h/p Mercury Tracker Stator Problems?

jimmywayne · #1 September 12th, 2007, 07:27 PM

I have a 40 h/p tracker that won't get fire to any of the cylinders. From what I've read that is a pretty common problem. Does anyone know what else the problem could be? I've tried to ohm it out from blue to blue/white and red to red/white . I get 1 ohm reading Does this tell anyone anything? I'm on disability so money is tight! I don't have a DVA meter any thing else I can check before I buy a stator? Thanks Jimmy

JUSTINTIME · #2 September 25th, 2007, 07:50 PM

buy a dva and test
pull the black/yellow wire out and see if you get sparky

Laddies · #3 September 25th, 2007, 08:08 PM

A DVA is by far the best meter to use but a OHM meter will find the simpler problems so here the test specs for both meter from CDI
IMG]http://i85.photobucket.com/albums/k62/Laddies_2006/4%20CYL-ADI%20TESTS/scan0003.jpg[/IMg]
Hang on I will try again

Laddies · #4 September 25th, 2007, 09:45 PM

Second try