Starter bolt pattern

f_inscreenname

f_inscreenname

Commander
Joined
Aug 23, 2001
Messages
2,591
As you can see in the picture it seems that my block is drilled for both starter bolt patterns and it uses a 168 tooth flywheel.
63aj6.jpg

Do you think I could use this one (Bond-o :D)? http://cgi.ebay.com/ebaymotors/PROC...0QQihZ017QQcategoryZ33576QQrdZ1QQcmdZViewItem
Or do you think it would be safer (fit wise) to get this one? http://cgi.ebay.com/ebaymotors/CHEV...emQQcategoryZ33576QQihZ017QQitemZ270122375315
 
Reel Poor

Reel Poor

Vice Admiral
Joined
Jan 29, 2005
Messages
5,522
Re: Starter bolt pattern

I would buy the standard style permanent magnent marine approved starter. I'm not sure if either one of those starters are CG approved.
 
Bondo

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
70,524
Re: Starter bolt pattern

I pick the 1st 1...... It's a Gear Reduction Stater,...... Sealed Motor with No Sparks......

The Delco style is a Direct Drive with the high-torque motor,....... It's gotta be Sealed.......

Look at the Centerline of the Motor,........
The pinion on the 1st 1 is Off set.....
The 2nd 1 is In line........
 
You must log in or register to reply here.
Top