1997 2355 Ciera Sunbridge SE Prop.

sprint7tw · #1 October 10th, 2006, 11:54 AM

I purchased a 1997 Bayline 2355 this year. If other owners of a 2355 would give me guideance on the prop they are using I would be gratefull. The prop I am using is stamped 48-78116-C1-15. This has been rebulit by Michigam Wheel and appears to be in top shape. I have been told this is the wrong prop for the boat. Trimed out I can only get 4400 RPM and a little over 30MPH.
Suggestion would be welcome!
Thank You!

sprint7tw · #2 October 10th, 2006, 12:01 PM

I left out the engine size in the above post.
Merc 350 5.7
Thank You.

msd58 · #3 October 10th, 2006, 01:37 PM

Try http://www.baylinerownersclub.org/ Tons of 2355 owners there

sprint7tw · #4 October 10th, 2006, 04:48 PM

Thanks MSD58! I will try it

dmarkvid2 · #5 November 11th, 2006, 11:09 PM

I own a 29' ciera sunbridge and have a 15 1/2 x 15 prop. I was having trouble getting on plane until I learned how to use my trim tabs. I was taking off with the tabs up, but I now find that if I start off with them all the way down, it takes no time to be up on plane, and then I ajust them from there, along with useing the out drive trim. I have an OMC 460 King Cobra, and I get 45 to 4800 RPM at WOT.