Mariner 60 1998 weak spark No2

Scondo

Seaman Apprentice
Joined
May 29, 2004
Messages
49
Hi All<br />I have a mariner 60 serial No op004089, giving me a hard time. it starts fine but runs like a bag of spanners,if i pull the HT lead off No 2 It does little to the running of the engine ,if i pull 1or2 HT off it boggs down.So have borrowed a known good stator and trigger and replaced on to my engine no change ,removed carbs and cleaned etc no change, borrowed a known good CDM and replace one at a time and no change ,I am lost!!Where do i go from here please<br />Thanx
 

Scondo

Seaman Apprentice
Joined
May 29, 2004
Messages
49
Re: Mariner 60 1998 weak spark No2

Hi All<br />Where i say if i pull 1-2 HT off it boggs i ment 1-3 HT
 

Scondo

Seaman Apprentice
Joined
May 29, 2004
Messages
49
Re: Mariner 60 1998 weak spark No2

Have put new plgs in and changed over no change. i did a compretion test today and no copression in No 2.from here not sure ,need to maybe look at reeds.
 

Laddies

Banned
Joined
Sep 10, 2004
Messages
12,218
Re: Mariner 60 1998 weak spark No2

Mers, with no compression you have more problems than reeds
 

Scondo

Seaman Apprentice
Joined
May 29, 2004
Messages
49
Re: Mariner 60 1998 weak spark No2

Hi Laddies<br />Thanx ,i took ogg the induction plate and saw two nice grooves down the bore on No 2 cylinder so that tells the story right there. will start to strip down and then put back new then go out fishing to forget.
 
Top