Prop Question

C

chieff

Cadet
Joined
Feb 14, 2001
Messages
12
I have a Quicksilver Laser II 24P 3 blade SS prop with a 115 Merc. It over-revs on planing out and I noticed that the prop has rectangular slots at the front of the prop for extra exhaust gas, I reckon. Do they have plugs for these holes and would it make a big difference?<br />Thanks <br />Wade
 
corm

corm

Lieutenant Junior Grade
Joined
May 12, 2000
Messages
1,241
Re: Prop Question

Hi Wade,<br />Yes PN 19220A4<br />You can use 1,2,or 3 of them to control the controled cavatation. This will adjust the rate that the engine RPM rises. Idon't ever recall a engine overreving comming on plane with these props unless it is mounted real high on the transom. Have a transducer or spedo tube mounted to close to the engine<br />would also cause the problem.<br />Try em they are cheap.<br /><br />------------------<br />...have fun...corm<br /><br />cubic inches = power<br />power = speed<br />speed = FUN<br /><br />Email me if you need to.
 
You must log in or register to reply here.
Top