Wires to ignition switch

D

danny gigli

Recruit
Joined
Apr 22, 2006
Messages
3
Hi guys..picked up a 1967 Evinrude 60 hp SportFour MDL #60753A Ser.# E01255 engine and want to check if it runs.<br />Need to know where to connect wires on harness to new ignition switch I pick up....wires are<br />Red w/white stripe<br />Green w/inline fuse<br />white<br />Brown<br />White w/red stripe<br />Black<br /><br />On switch it has 3 terminals Batt. Sol. Ign.<br />Any help on which wire goes where would be great<br />Thanks, Dan
 
D

DHPMARINE

Captain
Joined
Dec 16, 2003
Messages
3,688
Re: Wires to ignition switch

You'll need the correct switch.3 terminals won't cut the mustard.<br /><br />DHP
 
D

danny gigli

Recruit
Joined
Apr 22, 2006
Messages
3
Re: Wires to ignition switch

Originally posted by dannygigli:<br /> Hi guys..picked up a 1967 Evinrude 60 hp SportFour MDL #60753A Ser.# E01255 engine and want to check if it runs.<br />Need to know where to connect wires on harness to new ignition switch I pick up....wires are<br />Red w/white stripe<br />Green w/inline fuse<br />white<br />Brown<br />White w/red stripe<br />Black<br /><br />On switch it has 3 terminals Batt. Sol. Ign.<br />Any help on which wire goes where would be great<br />Thanks, Dan
Click to expand...
 
D

danny gigli

Recruit
Joined
Apr 22, 2006
Messages
3
Re: Wires to ignition switch

DHP, how many terminals should it have? And then which wires would go where? Thanks, Dan
 
You must log in or register to reply here.
Top