Evinrude Power/Tilt

A

asp

Recruit
Joined
Aug 5, 2005
Messages
3
3 months since last I used my 99 40HP evinrude 2 stroke and the powertilt wont move. I can heard the relays working. I need to get it fixed but because the tilt is stuck down I can't tow it as it's too low to the ground. Any way of releasing the tilt so as I can manually lift it? Many thanks
 
OBJ

OBJ

Supreme Mariner
Joined
Dec 27, 2002
Messages
10,161
Re: Evinrude Power/Tilt

Welcome ASP!<br /><br />There is a manual release on the unit. It'll have a slot for a screw driver. Kinda small, maybe 1/4" in diameter...maybe a little bigger. Turn it out a couple turns and you should be able to lift the engine manually. Look on the transom brackets....maybe marked manual release.
 
A

asp

Recruit
Joined
Aug 5, 2005
Messages
3
Re: Evinrude Power/Tilt

Thanks Ill look now, but can yoube more specific as there seesm to be a few screws<br />thanks
 
A

asp

Recruit
Joined
Aug 5, 2005
Messages
3
Re: Evinrude Power/Tilt

I've found it Ok many Thanks - off to the service department it goes.
 
capnstabbin

capnstabbin

Petty Officer 2nd Class
Joined
Mar 17, 2010
Messages
120
Re: Evinrude Power/Tilt

Can this be done in the water, will it release and oil fluid in to the water, or is it simply a release or pressure?
 
You must log in or register to reply here.
Top