adding hydraulics to Evinrude 115hp

TBarCYa

TBarCYa

Senior Chief Petty Officer
Joined
Apr 13, 2005
Messages
781
I have the hydraulic tilt/trim unit to add to my 1981 Evinrude 115 but it appears to be missing a hose of some kind. You can kinda see it on the left side of the attached image. What I need to know is what ends are on the hose so I can have one made or if it has a name or part number so I can order one.<br /><br />Any help is greatly apreciated. This is one of the last things I need to do to get my boat in the water for the first time. Thank you.<br /><br />
trim.jpg
 
TBarCYa

TBarCYa

Senior Chief Petty Officer
Joined
Apr 13, 2005
Messages
781
Re: adding hydraulics to Evinrude 115hp

Just bumping this up near the top in case someone can help. -Thanks.
 
F

fishcakes

Cadet
Joined
Apr 21, 2005
Messages
27
Re: adding hydraulics to Evinrude 115hp

Looks complete to me. I have the same unit on my 140. You might try putting 12v power to it to see if the pistons move. If so, I,d say it's working.
 
TBarCYa

TBarCYa

Senior Chief Petty Officer
Joined
Apr 13, 2005
Messages
781
Re: adding hydraulics to Evinrude 115hp

The one in the pic is complete but the one I have for my boat is missing the hose on the left side of the pic.
 
You must log in or register to reply here.
Top