Starter Paw Spring

OBJ

OBJ

Supreme Mariner
Joined
Dec 27, 2002
Messages
10,161
Guys...can anyone come up with a part number for the starter paw spring.....5hp Johnny, TD-20 (46'-49')? I got a few of these older engines I'm playing with....2.5hp Johnny, HD-25.<br /><br />Could use some carb gaskets and floats for both engines if anybody can put me onto a place to get them....havn't tried the Antique Outboard site yet but will.<br /><br />Thanks folks...Jim
 
Chinewalker

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Re: Starter Paw Spring

Hi OBJ,<br /> Those springs are getting scarce in the OTC sense. I have made a few out of guitar strings and they work quite well. Helps if you have one to use as a pattern...<br />- Scott
 
OBJ

OBJ

Supreme Mariner
Joined
Dec 27, 2002
Messages
10,161
Re: Starter Paw Spring

Thanks Chinewalker...good ID!! The boy is going to lose high E on his axe tonight... :) :) <br /><br />Thanks for the link Paul....that gave me some new ideas. The 2.5 runs after soaking the carb out over night. Had to reuse the old gaskets but they sealed OK with just a touch of gasket sealing compound. The problem is the little beauty surges and I believe its the float giving me the problem. We'll keep you all udated on what goes on.<br /><br />Thanks.....Jim
 
Joe Reeves

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
Re: Starter Paw Spring

For what it's worth, the OMC part number for that spring is #41,195.
 
You must log in or register to reply here.
Top