summer prep.

L

Little niangua

Recruit
Joined
Jun 5, 2005
Messages
1
I have this 125 hp force engine built under Chrysler ownership 1984 model. I am used to seeing two similar sized oil service ports on the lower unit. On this engine I see the two similar sized ports up high and a smaller screw down low where the drain and fill plug should be. The last time I pulled a small screw plug down low it was a pin holding something in place. Never did get it back in. Please... the drain refill proceedure for the lower unit oil. thanks.<br />Little :confused: Nianagua
 
jasonbailey

jasonbailey

Petty Officer 1st Class
Joined
Jul 25, 2004
Messages
253
Re: summer prep.

My L/U has a screw on the very bottom of the L/U that is the same size/shape has the filler and vent screws. That is the drain. DO NOT TAKE the smaller screw up near the front on the side. If you do you will be very very sorry.
 
jasonbailey

jasonbailey

Petty Officer 1st Class
Joined
Jul 25, 2004
Messages
253
Re: summer prep.

My L/U has a screw on the very bottom of the L/U that is the same size/shape has the filler and vent screws. That is the drain. DO NOT TAKE the smaller screw up near the front on the side. If you do you will be very very sorry.
 
You must log in or register to reply here.
Top