Search results

  1. M

    Suzuki DF70 trim problema

    I started having troubles with the trim on my 2000 Suzuki DF70. Can't trim up with the trim control on the throttle lever although I can trim up no problem using the button on the side of the engine. Could it be a faulty trim switch in the throttle control. Noticed it happened a couple times...
  2. M

    lower unit won't come off of 2000 DF70

    My impeller was well due of replacement so I picked up the new Suzuki impeller kit. I removed the shift lever pin, 6 side bolts and 1 trim tab bolt and according to what I've read the bottom end should break free with a bit of force. Can't seem to budge it. I tried a piece of spruce 2x4 along...
  3. M

    upgrading spark plugs on 2000 Suzuki DF70

    I'm going to replace the spark plugs on my DF70 and have though about upgrading from the stock BPR6ES NGK plugs to either G-power platinum or iridium. NGK's Canada site mentions Iridium is a good choice in places with fuel which may contain ethanol. My though was to at the very least try the...
  4. M

    Hard starting 1966 20hp Johnson

    I have a 1966 20 hp Johnson which is extremely hard starting cold. Once running, the engine runs well but getting it going initially is hard. Often it'll backfire with full choke. I haven't had it long and don't know the engines history. Seems to have good spark and plenty of fuel. Any...
  5. M

    prop, nut and pins for 1966 Johnson 20hp

    I've recently picked up a 1966 Johnson 20hp with the pin drive. The engine runs well but is missing the prop, nut, pins and potentially a spacer. I'm looking for the specs of the missing parts I need. Anyone have any information to what's necessary for me to purchase to get it going?
  6. M

    re-hubbing a Suzuki stainless prop to fit a Honda

    I've got a Stainless Suzuki prop 13inch x 17 pitch prop suited for about 100hp suzuki. I'm selling the prop and someone with a 90hp Honda is interested. Can the prop be re-hubbed with honda spline/bushing to make it work for him? Not sure about the diameter comparison on the housings of the...
  7. M

    Hustler prop for Suzuki DF70

    I was looking at the Hustler props for my 2000 DF70 Suzuki and my understanding was that the Johnson/Evinrude 70hp 4 stroke is the identical motor yet the hub listing for my engine is #36 and the Johnson #33. They should be the same number. Why would these numbers be different?
  8. M

    Porpoising boat and motor height

    After doing a motor upgrade to a Suzuki 70hp 4 stroke a few years ago I decided to retire my 1987 Alumacraft Classic side consul for a new 05 Alumacraft Magnum 165 CS. At the dealership they installed my engine at the 2nd to lowest setting and the boat porpoised significantly even at the lowest...
  9. M

    type of oil to use in the lower unit

    I'm replacing the oil in the lower unit of my Suzuki DF70 4 stroke and had a question regarding the type of oil to use. The manufacturer recomended a 90 weight single viscosity oil marine lubricant. I been told by some that a good qualilty differential oil like a 80w90 should do the trick...
  10. M

    Suzuki DF70 Making oil

    Just got back from my annual lake trout fishing trip. Did lots of trolling in very cold water and now the oil on the dipstick is up and slightly discolored. Had the same thing happen last year and changed the oil and all was good after. <br /><br />I was sure to take the boat for a good run...
  11. M

    DF70 periodic missing or stumble at idle

    I was out on holidays and found my DF70 on occasion would almost seem to miss or stumble while a idle. Engine otherwise started and ran great and no problem at any speeds other than at idle or trolling speeds. The stumble was periodic and did not occur each time I was out. Any ideas out...
  12. M

    murky oil in 2000 DF70 Suzuki

    I used my boat on a fishing trip for the first time about a week ago since changing the oil and winterizing last fall. We fished in Northern Manitoba on a lake that was still with some ice out in the middle. We fished for 4 days with extensive period of trolling (up to 7 hours each day) and...
  13. M

    replacing the impeller on Suzuki DF70

    I've got a 2000 DF70 and have never replaced the impeller and figured it was time. I'm about to get my boat ready for the water again after a long winter. One shop quoted me 1.8 hours for the job which seemed a bit high. I was thinking with a bit of assistance I might try the job myself. I...
  14. M

    trailer tires vs automobile tires

    I've got a boat trailer that is in need of new tires with 12 inch rims. Boat and motor combo is in the 1200-1400lb range. The tires I've purchased in the past have worn quickly and are twice as expensive as 12 inch automobile radials which can be purchased from Walmart. Has anyone ever used...
  15. M

    suzuki prop V-series vs U-series ;any difference in performance?

    I've got a 70 hp 4 stroke Suzuki and have a 13 1/4 x 17 pitch U series prop. I just purchased a identical size and pitch V series prop. Both fit exactly the same on the prop shaft and spacing is the same. The V-series hub it pressed in from behind and the U-series from the front. The exhaust...
  16. M

    powertrim for 50hp yamaha 2 stroke

    I was wondering if the powertrim unit off of a 1999 50hp yamaha two stroke would fit on a 1986 50hp 2 stroke yamaha. The 86 engine only has the tilt and not the trim.
  17. M

    props for 2000 70hp 4stroke Suzuki

    Since the new Johnson and late model Evinrude 70hp 4 strokes are just repainted Suzuki engines I'm guessing that Johnson/Evinrude would carry props to fit those engines as well allowing for a greater selection and availability of props. I was unable to find any part #s for props for these...
  18. M

    cisco

    Ciscos are in the whitefish family but are not the same species as a whitefish. A cisco has an upturned mouth whereas the lake whitefish is more down. Whitefish are excellent eating and cisco's from my experience tend to be a bit stronger flavored. Both tend to be tougher to catch but often...
Top