Search results

  1. D

    1994 Evinrude 140 V4, lower unit problem

    Had the boat out today, while cruising along at about 3000 rpm, the "transmission" slipped is how I would describe it. The prop stopped turning and the boat slowed like I had dropped it back in neutral. The motor over revved to about 5000 rpm. Pulled back into neutral, put it slowly into...
  2. D

    1994 Evinrude 140 V4- oil leak

    I have 2 stroke oil leaking off some small rubber hoses inside the engine cover. The hoses are small and located near the bow side bottom of the motor. How do you get access to check this out and install new hoses and clamps? I've only owned the motor for a year, I'm mechanically inclined, but...
  3. D

    1998 Merc 90 HP Lower Unit Shaft

    I had a shop replace my lower unit seals and when I went to reinstall it, it was locked in the forward gear. It started in forward and stayed there no matter where I moved the shifter. I took out this shaft: http://pic20.picturetrail.com/VOL164/2040090/3952594/409722538.jpg How do I fit it...
  4. D

    1998 90HP Merc 2 stroke- Lower Unit Nuts- Brass or Stainless

    I had my unit off, one of the brass lock nuts is cracked, can I replace with a SS lock nut? The brass were on the motor when I bought it with a boat in 2003, I assume they are original. Thanks, Don
  5. D

    1998 2 stroke 90HP, tilts up but not down- both switches

    My up works on the controls and on the switch on the side of the motor, is this likely a relay? What part do I need and does anyone have a picture of where it is on the motor. Thanks very much for any help. Don
  6. D

    90HP 1998 2 stroke- Lower unit has water in Oil- what seals?

    I changed my oil, it was creamy coloured, looked like coffee with lots of cream. How many seals are there that may cause this? Where can I find a drawing that will help me take the unit apart? I already have it removed. Thanks, Don
  7. D

    Evinrude 6HP Model 6804B- What year?

    The serial number is C7000406.<br /><br />Thanks,<br />Don
Top