Search results

  1. wellcraft-classic210

    Bending aluminum tubing to add more of a crown on the top ????

    I am considering bending the aluminum tubing to add more of a crown on the top / Only need an inch or so added to help drainage / reduce / eliminate puddling on top of the existing camper canvas . While a rolling tubing bender would seem to be the best way -- its not very cost effective and I...
  2. wellcraft-classic210

    Shift Interrupt setup woes

    Hi I have had a problem for some time that If i adjust so the shift interrupt to behave as expected coming out of forward Then when coming out of reverse I must give a really crisp shift and sometime go towards drive to get the sift interrupt to work. As I have tried various...
  3. wellcraft-classic210

    Thousand Islands trip in July 2019 -- Looking for local advice

    Hi We are pondering towing are 26 " cruiser over to the Alexandria bay area and renting a transient dock with power for 5 or 6 days in late July this year 2019. Any advice would be appreciated on 1-Places to Launch, dock & eat ( or to avoid ) 2-Things to do after we tour bolt...
  4. wellcraft-classic210

    Wood gantry plan

    I wanted to share these wood gantry plans --
  5. wellcraft-classic210

    Exhaust gasket and shutter questions 83 mercruiser 260 5.7L.

    I Pulled the Exhaust risers off the old tub for an inspection and they seem to be in great shape for their age 1983 -- freshwater use only. I found what seems to be a 3 piece gasket with a thin stainless steel spacer as the center section under the risers -- I was not finding this same part...
  6. wellcraft-classic210

    canvas seam sealer options

    Hi Just curious Anyone ever used silicone dilluted with odorless mineral spirit to seal a threaded seam on a canvas boat canvas. Or know of a good option other than the spray on liquids which do not see to be working. Material is Top gun & its fairly new // pulled pretty tight...
  7. wellcraft-classic210

    Check valves on mechanical fuel pump // anti siphon ???

    Anyone know the details on the mechanical fuel pump check valve design on a 1983 5.7 Mercruiser / Alpha as in ---Metal to metal or metal on rubber etc Just wondering -- Should they be able prevent fuel from siphoning back to the tank over an extended period such as a few weeks ?
  8. wellcraft-classic210

    Engine upgrades 5.7 383 etc

    Gents I am trying to get me head around the 5.7 engine swap vs upgrade Pro's & Cons ( Does this seem about right ? ) Curious about fuel consumption or other related cost factors as well I must admit I really like the idea of a 383 and more power but the practical side...
  9. wellcraft-classic210

    Down in the Bilge ( again)

    Hi I am replacing valve cover gaskets on a 1983 Mercruiser SBC 350 // It seems the fill tube needs to be removed to get the cover up and past the nearby exhaust manifold. I tried removing 1 fill tube strap on the exhaust manifold and wiggling & pulling up from above with no luck...
  10. wellcraft-classic210

    Leaky Quadrajet and or anti siphon valve

    The problem statement: On our Merc 260 ( 350 v8 with Quadrajet ) ) alpha 1 in a 1983 Searay SR260 I have had a lack of fuel issue at startup until the system builds pressure. This gets worse if the boat sits over 1 week and has been that way for some time now // However-- this season its...
  11. wellcraft-classic210

    MOORING COVER DESIGN QUESTIONS

    He I am interested in making a mooring cover that will serve for towing as well for our 83 26 ft Searay cruiser . 2 questions Any suggestions for fabrics other than Sumbrella to consider ? I am thinking somethings that's tougher but less breathable with vents might worth considering...
  12. wellcraft-classic210

    Alpha Trim Switch open up under heavy load // but works great otherwise.

    Just wondering if anyone has seen this before. The Vessel= an 1983 Searay 260DA with a 260 Merc ( 350 - Alpha -1 ) The problem = The Trim Switch open up under load ( when on plane -consistently) // but works great otherwise (slower speeds etc ). Its been very repeatable and...
  13. wellcraft-classic210

    Pin stripe adhesion after buffing

    I am getting ready to finish the buffing and replace the pin striping I removed . Whats the best way to ensure good adhesion of the vinyl after buffing & waxing // Or should avoid the wax altogether. My process in the past has been 400 grit for heavy oxides orbital sander 600 grit with air...
  14. wellcraft-classic210

    Merc trim wont adjust up while boat is on plane

    Gents I have a 1983 Merc 260 Alpha one with what appears to be an oildyne pump -- ( Dipstick with flat head screw top used to check & fill reservoir. ) I inherited a problem from the previous owner in that the trim system does not have enough strength to raise the drive while the...
  15. wellcraft-classic210

    Finishes for teak

    Hi Can anyone offer advice on sealing teak in and out of the cabin. I have seen some that seal the wood and look almost like golden oak. I am thinking I would like to use that on the areas prone to moisture cockpit rails etc. I also have a good amount inside the cabin & would like to oil...
  16. wellcraft-classic210

    Walking foot sewing machine -- Reliant Barracuda

    If anyone out their own's a Reliant Barracuda we would appreciate their opinion on this machine "Reliant Barracuda from defender" is similar to the Sailtrie LS1Z but $200 less. The reviews are mixed on Amazon but not very conclusive. Thanks!
  17. wellcraft-classic210

    shifter issue alpha one

    I just picked up a " project boat " 1983 sea ray 26' with a 350. I think the driveis an MR or Alpha but its possible its an r or pre alpha. Reverse is not engaging from the shifter but I can engage it manually by giving a push on the outdrive shift dog. Whats the best way to isolate a a...
  18. wellcraft-classic210

    1983 merc 260 -- upgrade ????

    Hi I am looking at a boat with a 1983 Merc 260 -- 350 v8 alpha one project -- I know its old iron but it seems pretty well preserved. I know it has a quadrejet & thunderbolt ignition --and is rated fro 260 hp // I suspect its original but not 100% sure My question is --...
  19. wellcraft-classic210

    Mercruiser guy-- Considering purchasing 1994 OMC boat -- any advice is welcome.

    Folks I am going to be looking at a 1994 Fourwinns Vista 238 this weekend. I am highly familiar with merc alpha ones bot not OMC. ( or Volvo ) Is it true that the 94's and above were identical to a Volvo and are not too hard to get parts for ? Any advice on things to...
  20. wellcraft-classic210

    40 hp Motor damaged from low oil

    A friend of mine damaged his 1995 40 hp outboard engine by running it with low oil. He knows a new motor is about $6000 and is looking at repair options. Can anyone recommend a good source for new or factory rebuilt power heads? Any other related advice is welcome. Thanks in advance!
Top