Search results

  1. E

    New to Mariners, question about lower unit adaptability for 1995 mariner 15hp.

    I just picked up a 1995 mariner 15hp long shaft. Model number 15el. SeriaI number 0g262662 know someone selling a lower unit from 1997 mariner 15ml. Serial number 0g445588 Sorry for the newbie question, but what is the best source for finding out if it would fit? Thanks.
  2. E

    Testing 85 evinrude 9.9

    I just picked up a a 1985 long shaft evinrude cheaply on a trade. It sat for 2 years in storage with gas in it. I am getting spark as I changed the plugs and wires. I am getting fuel thru the line as far as the carb. When I try to start it, which it won't, the plugs are dry. So I'm assuming the...
  3. E

    1977 35hp lower unit, will any other years work?

    I just found out that the lower unit on my 77 evinrude 35hp long shaft has a cracked lower unit. Does anyone know if a 78 or 79 lower unit will work? I am leaving in two months for Canada and the only one I can find is a 78. Thanks.
  4. E

    5hp evinrude year?

    Tried to use the pdf but did not have much luck. Serial number is 7518-15296
  5. E

    More important, pee hole, or exhaust water?

    I have a 77 evinrude 35hp, which I just found this morning had a cracked lower unit. I went and got a used one off of someone (parts motor), and you could see where it has a new waterpump housing, etc.. After struggling to mount up the new lower unit, I tested the motor.. Took a couple seconds...
  6. E

    77 35hp tach?

    Can anyone tell me of a the model number of a cheap tach for my 1977 evinrude 35hp? Not sure if it matters, but it is electric start... Thanks..
  7. E

    40hp converted to 60hp, or 60hp model #?

    I was asking around about a good strong running 40hp motor for my 16ft deep v alum on another site, and they were saying that a certain 40hp 3cyl 2 stroke merc was the same as a 60hp, but it was restricted?? Is there any truth to that? WHat model motors is it? I am more worried about the weight...
  8. E

    Evinrude 50hp E50DTLEUR specs..

    I am looking at this motor tommorrow it is a 97 or 99, but was wondering how much it weighed? I have a 78 35hp evinrude, and was just wondering how much more it weighed.. What kind of controls do I need to get for it? I assume the ones I have on my boat now would not work, since I think the...
  9. E

    What year 20hp does this look like?

    Will get another picture up shortly..
  10. E

    6.5 Hp id'ing help

    Someone has a 6.5? hp evinrude for sale. Says the serrial number is 61036-J01636. She said the second 6 could be a G. Anyone know what year it would be, and value? Sorry but the motor is two hours away, just trying to get info. Thanks.
  11. E

    Taking carb off and throttle cam adj?

    I am getting ready to take the carb off of my 77 35hp motor, and was wondering, when I do, , if I do not mess with them, will I need to readjust any of the linkages? I have a oem manual, but for some reason the throttle cam ajustment is confusing me, and I am afraid that if I take it off, I may...
  12. E

    Minn Kota prop removal ?

    Dumb question guys. I have a minn kota 3hp trolling motor that I want to remove the prop on. It has a flathead screw in the middle, with a plastic wing nut around it. My questions are, is the a normal screw or counter clockwise screw, meaning is it clockwise to loosen it? And the second...
  13. E

    Lower gear oil pump?

    After reading on here how you should fill from the bottom hole to do the lower unit oil, I was wondering, can I only get a pump with the proper threaded fitting for a evinrude at a evinrude dealer, or do they come with multiple fitting at auto places? Thanks..
  14. E

    Water under the engine cover?

    Well I finally got the 77 evinrude 35hp motor i am trying out started. While running it in the barrel, I noticed what i thought was water coming out of the fuel line. After inspecting, I realized it was water. Pulled off the cover, and there was water laying in the base of the engine bay. I can...
  15. E

    Starting problems 35hp 77

    Well the motor I have, a 77 evinrude 35753h, I finally got everything hooked up , changed the plugs and have attempted to start. It will run for about 1-2 seconds, then shut off. It will do it again, and again, and again. Last night, I got it to stay running barely, and it almost seemed like it...
  16. E

    77 35hp evinrude starting wires?

    The 77 35hp evinrude I just picked up to test out, has a set of wires coming out of it. (ground and + , pluse 5 wires) After searching on here and looking at several links from here.. http://continuouswave.com/whaler/reference/ignitionSwitch.html...
  17. E

    Model 35753H 35hp value and steering?

    I am wondering what the value of a 75-77 35753H 35hp evinrude long shaft with eletronic ignition and controls is worth in good running order. Also what kind of steering setup do you have to use? The boat I am buying has a set of wires to the steering wheel, and on both side of where it would...
  18. E

    Gas tank lines for 57 evinrude sportwin 10

    The tank for the motor I am using, one of the lines is bad. Do i have to get a new double line specific for this, or can I got to somehwere like auto zone and get the same diameter lines? If they have to be specific, where can I get them? Thanks.
  19. E

    Year of Johnson or Evinrude 35hp?

    Sorry for asking so many id questions, but I do not see a webiste to find out the year of the motors.. A motor that is for sale around here is 35hp model number 33753c serial number e02527. Anyone know of the year of this? ANd what kind of controls should it come with? I know it is electric...
  20. E

    sportwin 10 year id and tank help.

    My cousin is letting me use his evinrude sportwin 10. The serial number is 10014 04992. Anyone know what year it is? And the tank, I am assuming the small silver handle is how you pump the line? There is fuel in the tank and in the line that is OLD. How can I get the fuel out of the tank line...
Top