Please note this thread has been inactive for 90 days. For the best results, please start a new thread.
Results 1 to 2 of 2
  1. #1

    Default removed rust and paint off prop

    i have a 1983 johnson 115hp motor on a ebbtide dyna trak 162 my stainless prop is a 13x19 painted black. it had minor surface rust on the tips of each blade were the paint had wore off over time. I cleaned and stripped all the rust and remaining paint off the prop. my question since it is not the polished stainless finish, can I leave it the way it is now or should I paint it again.also this boat is only in fresh water. THANKS FOR ANY INFO

  2. #2
    Admiral jerryjerry05's Avatar
    Join Date
    May 2008
    Location
    Sebastian Fl.
    Posts
    7,205

    Default Re: removed rust and paint off prop

    You can repaint it to make it look pretty.Or don't waste your time.It won't hurt anything the way it is.J

Similar Threads

  1. Layers of Old paint need to be removed.
    By poodledestroyer in forum Boat Restoration, Building, and Hull Repair
    Replies: 3
    Last Post: June 19th, 2009, 12:58 AM
  2. Does a prop have to be removed to have vent holes drilled?
    By MagicNumber in forum Prop Questions and Topics
    Replies: 2
    Last Post: June 6th, 2008, 11:59 PM
  3. Rust-Oleum Marine topside paint???
    By drewmitch44 in forum Boat Restoration, Building, and Hull Repair
    Replies: 5
    Last Post: February 8th, 2008, 09:36 PM
  4. Should I bother to paint rust on outside of manifolds/riser?
    By garycinn in forum Mercruiser I/O & Inboard Engines & Outdrives
    Replies: 11
    Last Post: November 24th, 2004, 04:11 PM
  5. Rusty trailer...can I paint over the rust?
    By ZmOz in forum Trailers and Towing
    Replies: 8
    Last Post: September 21st, 2003, 07:05 PM
  1. iboats Forum Directory - Over 100,000 forum posts organized by topic