Recent content by zabitac

  1. Z

    Deck Drain - 2000 Starcraft

    I also have a deck drain problem on my 2000 Starcraft 20 ft deck boat. The drain just under the floor storage compartment drains from the left front lower side of hull. However, water also comes in at the same location if I have 3 or 4 people in the front of the boat. If the boat is sitting down...
  2. Z

    GPS Combo recommendations

    My 2000 Starcraft Aurora 2015 has issues with the speedometer and Lowrance 3500 depth finder. I'm thinking that a GPS combo might be better than repairing/replacing both. I won't use it for fishing.I would like to be able to follow a river channel, measure speed, & measure depth with an in hull...
  3. Z

    detachable mirror options for a deck boat

    I have a 2000 Starcraft deck boat with a side console. There's no rail beside the console and only a small windshield that doesn't have a frame. I would like to have a detachable mirror , at least 78 sq in, that mounts to a permanently installed bracket on the console. The only one I've found is...
  4. Z

    Starcraft Mercruiser speedometer issues

    The prior owner of this Starcraft Aurora 2015 deck boat says the speedometer hasn't worked in 3 years. Before purchasing the boat, I paid to have the water pump installed in the stern drive. I called the mechanic later to ask if the speedometer worked when he test drove it. He said that he test...
  5. Z

    compare water depth needed on 2000 Starcraft 2015 deck boat to 1995 Bayliner 1850 LS

    I've owned a 1995 Bayliner 1850LS bowrider with 4.3 Mercruiser for 16 years. I'm considering buying a 2000 Starcraft Aurora 2015 deck boat with a 5.0 Mercruiser. I would like to know if the Starcraft boat requires a greater water depth for travel than the Bayliner. It appears that the dry gross...
  6. Z

    Bayliner power trim limiter switch, 1995 1850 Capri LS

    The power trim up switch won't work. The trailer trim works fine. When the up switch is closed, there is power on the output of the switch, but not on the input of the up solenoid. I think the issue may be with the trim limiter switch, but I can't find it. Can anyone help?
Top