Good morning,
I have owned this motor for 5 or 6 years and it has been flawless. Last fall it died coming back from a duck hunt and wouldn't start. Rowed the boat the 1/2 mile to the launch and parked it until warm weather. I pulled the input fuel lines from the carbs and there was no fuel...
God morning,
After tracking down and repairing several issues with my 1994 50HP Johnson I was having a hard time pulling fuel into the primer bulb from the tank. I decided to pull the pickup tube out of the gas tank to make sure the screen wasn't clogged up. I put a wrench on the square...
I donated a boat and 40 hp Johnson to my stepson for a project. He has it almost ready to go. When I brought the boat and motor into the garage it turned fine. Last week we tried to start the motor to veriy water in the telltale etc and the motor won't turn. I tilted the motor all the way up...
I recently picked up a 1989 Grumman GSF 184 with no motor. I bolted on a 90hp Evinrude. I was having trouble getting any gas to make it from the onboard tank up the gas hose to the primer bulb. I pulled the hose barb that connects to the main fuel hose. there is a check ball inside it that...
Guy dropped off a boat for me to look at and try to make run. Old Electric Seahorse 40 hp, can't find the year on any of my normal web sites. Anyone know what year a 40 hp model number RXL114 was build?
thanks
Bill
Looking for a little advice. Looked at a project boat the other day and the motor is an Ocean Runner 200, unsure of the year as the tag is partly illegible. Owner thinks it is a 2005 or 2006. Took a hit and punched in the leading part of the lower unit, caved in the cone about an inch. Also...
The old gent down the road just came back from Florida dragging a Pontoon behind him. I help him out with his projects as he has COPD. The pontoon is a 1991 Sun Cruiser with a 1001 Evinrude 40HP. The deck is 16'6" long and the pontoons are 20' long. The trailer only has one axle and he is...
Working on a 1994 Evinrude E115TXARS. Most of the wiring on the motor has been mouse chewed and I have tried to find a kit for the wiring on the motor. I don't need the long cord with the red plug, just everything inside the engine cowl. Does anyone have a part number or part numbers for this...
Trying to get my buddy's new to him boat ready for when he gets out of the hospital. I have spent a fair bit of time on the carbs, finally all passages are open. New impeller. New spark plugs. Starts right up and sounds great. Today I was making some adjustments to the throttle linkage...
I have an outboard that was purported to be a 1994 Johnson 115. Serial tag on the mounting bracket is illegible, and I don't seem to be able to locate the welch plug on top of the motor. Trying to order carburetor parts and I have a carb tag from one of the carbs. Is there any way to use that...
just picked up a 1989 90hp Johnson, needed an impeller and a "tune up". Got the parts all ordered for the impeller but I have a question. Were the water tubes made out of copper? I do not recall seeing copper water tubes in my previous 90's and the tube seems to be a tad short. I went back...
