I am trying to remove the control box so I can reupolster side panel. My problem is can't remove control box. I have a Quicksilver control box with trim switch and trailer button as well as guessing a neutral warm up button. I popped out the neutral button but don't see any bolt or anything to...
I have been working on this thing now awhile watched linkage move and it opens up all the way butterflies open all the way but only get about 7 mph out of it. On dry land it will rev right up but not on water.
I just recently had ground problem and fixed it. I also took control box apart to see what kind of ignition switch it had, put it back together and now the warm updoesnt work and only goes to quarter throttle even at wot. Now if i move throttle linkage by carbs it revs right up
I am new to this whole diagnosis thing. My boat recently started running on one cylinder, so I replaced the plugs. Now no spark at all on any cylinder. I disconnected cable going to key switch and jumped starter still no spark, reconnected cable and took test light to wires coming from stator to...