I rebuilt the solex 44 on my VP 230a. Set the screw for the idle and idle mix per the service manual. 2 turns after touching the plate and 8 back from the seat. The engine will start after pumping the throttle. You can see a stream of fuel from the main jet in the center of the venturi. I...
I think I need to replace the u joints in my stern drive. I'm trying to run down the part numbers so I can get them ordered up before I tear it down. I have found the Volvo ones for $75 each. Does anybody have a Spicer, precision gear,...... Cross number? This should be a $20-30 piece not...
Re: Prop for 1993 Wellcraft Excel - help please
1. Year, make and model of boat
1993 Wellcraft Excel 18SX I/O Bowrider
2. Length, width and base weight of boat, look for boat decal on back of boat
Centreline 18 ft
Beam 7?2?
Base weight 1,900 lb (from manufacturer)
2a.What is the maximum...
I want to put a Fumoto valve on my boat, based on looking up the Volvo 2.3l automotive engine it shows that it would be 3/4"-16 UNF. I just want to try to confirm so I can get one ordered up and change the oil.
Thanks guys!
I searched and couldnt find it. The service manual for the drive shows NLG#2 and #2.5, are yall using Lithium base or Polyurea ? Or just a good EP #2 bearing grease?
This is on my new to me 93 Wellcraft 18SX Volvo 230/270
Thanks!
Well I have searched and searched....
I'm looking at a 93 wellcraft 18sx with the 2.3l. There selling due to a baby on the way. It's in very nice shape, with the exception that the last trip out it is running warmer than normal (just above 200). The engine circulation pump is slightly...