Does anyone know what color paint would match this Evinrude? If possible, I would like to be able to get it at a local auto parts store or the like. Duplicolor? Plasti-Kote? Krylon? etc. Anything that even comes real close???
Thank you
It has a Volvo 4.3 L I/O 190 HP in it. I have not found out how many hours are on it but the boat "looks" to be in very good shape.
I'd like to know if these Volvo engines are any good. I plan on going to look at it it and wanted to find out if there is anything specific/characteristics about...
I have a Four Winns jet with the Evinrude 115 hp V4. I have removed the oil injection. I would like to put a stand alone fuel pump on this motor and completely take off the VRO.
Can anyone tell me what fuel pump (part number if you got it) would go on this setup? To clarify, this is an Evinrude...
I live in Northwest Illinois, around Woodstock, Crystal Lake, Mchenry, Algonquin, just to name a few towns. Can anyone recommend a good/reliable mechanic that can work on OMC 115 Turbojets. I have one that has no power only when in the water. I have looked on these and other forums and have...
1995 Four Winns 115 Evinrude on a jet.
Has no power. Boat goes 5-10 mph max. Starts great. Idles great. These are the fixes I have tried...
After removing from the lake of really slow boating, I tried replacing spark plugs and hooked up the 6 gal. fresh gas tank from my outboard. FLushed lined...
Re: My 115 hp Evinrude on jet will only go about 10mph....Please tell me why?
Thank you Bubba. Here is what I could do so far. I took a picture of of the lever under the flywheel at WOT. It appears to stop just short of a bolt head that may be the stop position for the plate. There is no rubber...
I have a 1995 Four Winns 14" with an evinrude 115 v4 on a jet. I'm not sure I have a jet problem or an engine problem. This is the dilemma: It starts fine, idles fine but when accelerating to WOT, it gets to about 5-10 mph only. The motor does not seem like it is at full throttle.
This is what...
I have a 1995 four Winns Turbo Jet I am trying to convert to mix gas. I have read the description in the "top secret" file but mine is a little different and I just need some clarification on an item or two.
Attached is a picture on my engine. It shows a round canister that is about 8 inches...
I just got my 1995 Four Winns and before I go out, I wanted to check some things over. There is a yellow screw on cap under the power head in the front of the pump ( I think that is the pump) I removed the yellow cap and I can see there is some oil in there but I don't know if it is enough or if...
The boat is a Four Winns Fling from 1995. I keep hearing it is safer without it. I saw the steps in the "top secret files" but it says to ask if this same procedure works for my engine?????
Thank you for your help
All the seats/cushions are faded, stained and some are starting to separate at the seems. I'd like to replace the material. Are there replacement materials for a boat this old? If so, who would you recommend getting them from. I did a google search and didn't find much for replacement material...
FLing. I'm trying to look up which owners manual I should get for the engine and i/o drive. I was told this was an OMC...then I was told the engine is an Evinrude. I can't read the model number on the boat as the sticker is warn off. This boat is a 1995 Four Winns Fling with the 115 HP turbo...
I recently acquired this boat and it seems to run fine. I keep reading about the oil injection being a problem, or eventually will be. Would it be best to disconnect it completely? If so, how ( does it just unplug)? I have also heard that synthetic oils would be better to use in a 50:1 mix, is...
This boat was winterized last fall and has been sitting ever since. It will crank over just fine but will not start. Is there some kind of De-winterizing that needs to be done before starting it? I tried starting it in my drive way but am also concerned about firing it up when it is not in the...
I am looking at purchasing the above mentioned engine. It has electric shift and electric start. There is supposed to be no issues with this engine but it has no controls for it. I want to go look at it tomorrow but before I do I wanted to research what remote control units will cost me for it...
