I am in the process of changing out my tilt/trim for my 82 115 Evinrude. This forum has been a big help, and my new tilt/trim should be arriving tomorrow. I have gotten the six bolts off of the stern bracket with the help of PB blaster and a blowtorch. Now I am having trouble getting the...
I am bidding on a used tilt/trim unit on Ebay for my 82 evinrude 115. It says it is a 3 wire. I believe mine to be a two wire. Other than that, it looks exactly the same. Will I be able to use the 3 wire on my boat? I was already planning on replacing the entire electrical box anyway as it...
I have an 82 Evinrude 115 v4 experiencing power tilt/trim problems. I bought the boat off a guy real cheap last summer because he said the tilt/trim was out. We got it home and topped off the fluid and cleaned off the contact points and it worked again, but the seals leaked. Now a year later it...
I have an 82 Evinrude 115 v4 experiencing power tilt/trim problems. I bought the boat off a guy real cheap last summer because he said the tilt/trim was out. We got it home and topped off the fluid and cleaned off the contact points and it worked again, but the seals leaked. Now a year later...
I have an 82 Evinrude 115 on a 171/2 fiberglass 1983 Glassmaster runabout. The current prop on there is 13x19 SS. I generally use the boat for cruising in the harbor with a few friends and fish/ski occasionally. It has power tilt/trim. Is this the best prop for my needs? The tach said 5200 at...
My 1982 Evinrude 115 is dripping oil down the leg of the motor all the way down to the bottom. It appears to be coming from the base of the powerhead, but if you take off the cover, you can see oil all around the base of the inside of there too. The motor seems to run fun otherwise and the...
I have a 1982 Evinrude 115 on an 83' 17 1/2 Glassmaster. Motor runs great and has always been well maintained. The problem is lately I have noticed oil running down the outside of the shaft of the motor. It seems to start from the beginning of the shaft and drips all the way down to the...