Need some help identifying an Eska motor. The information that I have found on here say that it is a 3,4,6 or 7 bourse power. It has the water tube to the exhaust plate. No impeller or N-R. On the motor it self it has an aluminum tag with these numbers on it: T-634-07E and 5075835. I have looked...
I have a 1991 Mariner 150 mag. 2 ser#0D007551. I replaced the water pump in it this weekend. The reason is that it was only running about 2psi. @ ideling and 8psi @WOT. Now it is about 7psi and 12psi. But at ideling it shows 5psi on the gauge but there is none coming out the p hole. it only...
i have a mariner outboard that has 150 magnum 2 on it. when i type in the serial # in at mercury web site it tells me that it is a 2.4L magnum 2. Is a 150 a 2.4L? Any response is appriceated.<br />ser.# 0D007551
i have a mariner outboard that has 150 magnum 2 on it. when i type in the serial # in at mercury web site it tells me that it is a 2.4L magnum 2. Is a 150 a 2.4L? Any response is appriceated.
I have read a lot of reports on this board on stalling and have been checking them out on my motor. I have a 87 merc 70hp. Last weekend coming across the lake it started cutting out. I could choke it and it would stay running but not very well. I then could reach back and pump the fuel bulb...
i have 88 ray craft 16' w/70hp mercury. it is real slow out of the hole. it idels real rough and is hard to put into gear w/out it dieing. also when you do get it to plan out at full throttle it is only runing at maybe 2500-3000rpm and after about 5min. of running it dies. like some one just...