Can anyone help me with the power pack part number for a AML35D motor. The part number that I researched in this forum is #585224, but that is the one with the SLOW temp sensor. I need the one without the SLOW because my current Power pack is the one without it. The part numer on my current...
I have a 1995 Johnson 35hp 2stroke motor on a 13' Boston Whaler.
I was wondering if anyone has an idea of the amount of fuel (GPH) that motor will burn with two people and fishing gear trolling at say 1900-2000 rpm's.
I have a AML35d military motor. I seem to have a water leaking into the engine compartment. I have replaced the head cover gasket and the exaust cover gaskets. But I still have water leaking on the port side of the engine from the a drain hole. This leak only happens at high rpms. Anyone...
I found a leak in the fuel line that runs from the top of the powerhead to the bottom of the powerhead. What is this fuel line for? What are the effects on the engine having a leak in this fuel line? (95' 35hp Johnson AML35D 2- cylinder).
I have a 35hp johnson 1995 (AML35D). I just replaced the water pump (kit) and cylinder water cover gasket and thermostat. Upon removing the cover and the thermostat I realized the thermostat was stuck open. Now after running the motor after the thermostat replacement it seems to run a little...
Well I went ahead and started to disassemble my carb. Upon removing the bowl I noticed one of the core plugs was missing. My carb on the outside have holes on either side with metal screen covers which I think that one of the core plugs covers in the inside, but the hole on the other side the...
I performed a compression test on my 95' 35hp johnson and got 110psi on both cylinder's. Does this sound ok? What would is the correct pressure reading?
