Please note this thread has been inactive for 90 days. For the best results, please start a new thread.
Results 1 to 5 of 5
  1. #1
    Cadet
    Join Date
    Aug 2003
    Location
    ohio
    Posts
    1

    Default 61 evinrude fuel leak + water pump question

    I have a 61 evinrude starflite III 75 hp. While running,fuel is pretty much pouring out around the top of the lower unit. It appears to be running down inside of the casing btween the motor and lower unit. None of the fuel lines seem to leaking on the motor. I was told these engines bypass fuel, is there a hose that runs thru this caseing to some sort of weep hole that may be off? Any info would be appreciated. Also does anyone no where I might find a water pump impeller and is this fairly simple to change out. thank's dacsacjac

  2. #2
    Cadet
    Join Date
    Aug 2003
    Location
    mareiette WI
    Posts
    26

    Default Re: 61 evinrude fuel leak + water pump question

    ohio I know theres good fishing over there. I have a 63 starflite IV 75 HP. with simler problems. I'de like to know the best way to test the pump out. and how to get to it. you're not alone. fireball N.E.WI.

  3. #3
    Chief Petty Officer Droll's Avatar
    Join Date
    Jul 2003
    Location
    Elverum / Norway
    Posts
    514

    Default Re: 61 evinrude fuel leak + water pump question

    Last thing first ,Impaller 75hp 1960-65 Sierra #18-3005 ( check Napa ) or OE #377992 ??.The fuel system shuld NOT leak anywere .Follow the fuel-line from tank to carburators, it is an 61 mod engine ,why not replace those hoses .You may also check the carburators ,maybe time to rebuild them .Carb kit is available ,also replace and/or adjust the float , so you get the right fuel level in the carb.
    My engines :
    Mercury TII, next project
    Johnson V4m-10s 90 hp 1964,from the prosess.
    Mercury L6 ,Rebuilding a Tower

  4. #4
    Cadet
    Join Date
    Aug 2003
    Location
    mareiette WI
    Posts
    26

    Default Re: 61 evinrude fuel leak + water pump question

    how do you get to the impeler? and how dues it work?

  5. #5
    Chief Petty Officer Droll's Avatar
    Join Date
    Jul 2003
    Location
    Elverum / Norway
    Posts
    514

    Default Re: 61 evinrude fuel leak + water pump question

    1# Disconnect cabels to gear (2 cabels on port side of engine )2# Remove " window" from lower unit ( blue dots )3# Remove "inner window" lower unit (gren dots )Disconnect shift rod ( manuel gear )Release shiftcable ,slide the cable inside when removing lowerunit ( Electric gear )4# Remove 8 bolts ( red dots , 4 left side +4 right side )5# Lower the lowerunit carefully , watch the cable .6# Remove 4 bolts on the waterpump , take out impaller .7# clean the house and insert new impaller ( do a search in the forum howto..)8# All above in reverse .. This is my engine ,and my way to do it
    My engines :
    Mercury TII, next project
    Johnson V4m-10s 90 hp 1964,from the prosess.
    Mercury L6 ,Rebuilding a Tower

Similar Threads

  1. 1980 15 HP Evinrude carb/fuel pump question
    By khansen in forum Johnson & Evinrude Outboards
    Replies: 7
    Last Post: August 8th, 2010, 12:17 PM
  2. Fuel Leak Fuel Pump x2 2000 Yamaha f100tlrz
    By sheedyslick in forum Yamaha & Suzuki Outboards
    Replies: 3
    Last Post: February 21st, 2008, 05:49 AM
  3. 70 evinrude 60 hp water pump question
    By ncline8 in forum Johnson & Evinrude Outboards
    Replies: 5
    Last Post: September 2nd, 2007, 05:57 PM
  4. 1995 70hp Evinrude water pump leak?
    By Quin in forum Johnson & Evinrude Outboards
    Replies: 8
    Last Post: November 9th, 2006, 10:57 PM
  1. iboats Forum Directory - Over 100,000 forum posts organized by topic