Please note this thread has been inactive for 90 days. For the best results, please start a new thread.
Results 1 to 6 of 6

Thread: 1990 Johnson 60

  1. #1
    Seaman Apprentice
    Join Date
    Jun 2005
    Location
    Texas
    Posts
    47

    Default 1990 Johnson 60

    Hello everyone. Haven't been on the forum in awhile.
    My motor has a fuel leak at the electric primer solenoid. when I push the key in I can see fuel see fuel squirt out from around the red manual valve. My shop manual shows that there's an o-ring on the manual valve. Not sure if I need to take the solenoid apart to get to the o-ring or not.
    Motor starts easy but won't idle very well. Air leak?

  2. #2
    Supreme Mariner
    Join Date
    Feb 2001
    Location
    Port Charlotte FL but never the same since hurricane Charlie
    Posts
    16,977

    Default Re: 1990 Johnson 60

    It may or may not have anything to do with the bad idle, but it could. You'll have to take the top off to fix it regardless. No big deal, very simple & straightforward.

  3. #3
    Seaman Apprentice
    Join Date
    Jun 2005
    Location
    Texas
    Posts
    47

    Default Re: 1990 Johnson 60

    Thanks for the reply. Will fix that and see what happens. I rebuilt the carbs last summer so hopefully it's something simple like an air leak.

  4. #4
    Supreme Mariner
    Join Date
    Feb 2001
    Location
    Port Charlotte FL but never the same since hurricane Charlie
    Posts
    16,977

    Default Re: 1990 Johnson 60

    If the motor has been sitting with untreated fuel the carbs could be due for another bath. Non-use is the worst thing for a motor.

  5. #5
    Seaman Apprentice
    Join Date
    Jun 2005
    Location
    Texas
    Posts
    47

    Default Re: 1990 Johnson 60

    It does sit with treated fuel in the tank. I finally had time to remove the primer solenoid. the manual primer valve has a crack from one end to almost where the o-ring is. don't have clue how that happened

  6. #6
    Seaman Apprentice
    Join Date
    Jun 2005
    Location
    Texas
    Posts
    47

    Default Re: 1990 Johnson 60

    Got the parts to fix the primer. Parts came from Houston,Tx and shipped the day before they got hit by Ike. As soon as the land lines are back up I be thanking them. Will take the boat out this weekend. Hopefully it will idle better.

Similar Threads

  1. 1990 johnson 60 overheating?
    By sattaker in forum Johnson & Evinrude Outboards
    Replies: 17
    Last Post: August 5th, 2008, 10:38 AM
  2. 1990 Johnson 60 - rebuild?
    By MVM in forum Johnson & Evinrude Outboards
    Replies: 7
    Last Post: September 28th, 2007, 08:53 AM
  3. Johnson 60 hp 1990 compression
    By dinomutt in forum Johnson & Evinrude Outboards
    Replies: 1
    Last Post: July 6th, 2007, 05:26 PM
  4. What do I need to know about a 1990 60 Johnson?
    By Nos4r2 in forum Johnson & Evinrude Outboards
    Replies: 5
    Last Post: April 30th, 2006, 06:40 AM
  5. 1990 Johnson 60
    By firewalker1 in forum Johnson & Evinrude Outboards
    Replies: 2
    Last Post: April 28th, 2005, 01:17 PM
  1. iboats Forum Directory - Over 100,000 forum posts organized by topic