Please note this thread has been inactive for 90 days. For the best results, please start a new thread.
Results 1 to 6 of 6
  1. #1
    Cadet
    Join Date
    Nov 2005
    Location
    New York City
    Posts
    26

    Exclamation 1990 120HP Johnson info

    Can any one tell me about this motor I'm planing to buy it to replace a force 120HP in my 21' bayliner trophy.
    Is this a good saltwater engine and if there's any known problems etc.?
    the serial # is J120TLESB.
    Thanks to All.

  2. #2
    Senior Tech Advisor tashasdaddy's Avatar
    Join Date
    Nov 2005
    Location
    Jacksonville, Florida
    Posts
    51,017

    Default Re: 1990 120HP Johnson info

    much better engine than the force. no known problems. make sure compression is above 100 and within 10 % of each other. good crisp bluish spark, jump 1/2 inch. lower unit no water. if it does not have the VRO2 fuel/oil mixer, update it , or go to premixing fuel. when was the water pump last serviced, and carbs cleaned and rebuilt?
    FLORIDA GATORS
    TEBOW Country



    Please, NO PM's (Private Messages) regarding boat/engine problems. they will not be answered.
    That is what these forums are for. Post your questions, in the appropriate Forum.

  3. #3
    Senior Chief Petty Officer
    Join Date
    Mar 2005
    Location
    Wollongong Australia
    Posts
    761

    Default Re: 1990 120HP Johnson info

    the info supplied is spot on, the new Engine will eat your old Force for Power, and it is a fairly simple reliable Motor, but is on the large size and quite heavy!

  4. #4
    Supreme Mariner
    Join Date
    Sep 2003
    Location
    Cape Cod
    Posts
    12,536

    Default Re: 1990 120HP Johnson info

    If your boat is the cuddy model, rated for 230hp, you are very marginal at 120HP.

    The motor is a torque monster, so with the right prop you can expect a lot, but your top end will be very limited.

    http://www.iboats.com/Bayliner_Boats...0/bp/64b8241r1

  5. #5
    Cadet
    Join Date
    Nov 2005
    Location
    New York City
    Posts
    26

    Thumbs up Re: 1990 120HP Johnson info

    Thanks to All for the info.
    I'm bying this motor from the goverment and with luck it was well serviced.
    It was used in fresh water and kept out of the lake in winter.
    It will be used in a 1990 walkaround 21' trophy that came with te force 120HP
    any ideas as far as the average $ for this motor?
    Any more information will be greatly apreciated.
    Again Thanks to All

  6. #6
    Fleet Admiral HighTrim's Avatar
    Join Date
    Jun 2007
    Location
    Hamilton,Ontario
    Posts
    8,191

    Default Re: 1990 120HP Johnson info

    Could always check Nada.com for a rough estimate, although I sometimes tend to disagree on their estimates. Really does depend on the condition, then minus the work needed to be done.

Similar Threads

  1. 1990 Johnson 120HP gas bulb keeps going flat.
    By Pwa120 in forum Johnson & Evinrude Outboards
    Replies: 4
    Last Post: June 27th, 2006, 11:39 PM
  2. parts info 1990 9.9 johnson
    By rbponto in forum Johnson & Evinrude Outboards
    Replies: 0
    Last Post: September 9th, 2003, 05:12 AM
  3. lookin for info on 120hp johnson v4
    By northendauto420talbot in forum Johnson & Evinrude Outboards
    Replies: 1
    Last Post: February 11th, 2003, 05:08 PM
  4. 1990 FORCE 120HP TOP END
    By bulldogs in forum Force & Chrysler Outboards
    Replies: 1
    Last Post: June 11th, 2002, 09:27 AM
  5. proper prop and engine redline for 1990 120hp johnson
    By dwaynefromva in forum Johnson & Evinrude Outboards
    Replies: 1
    Last Post: August 30th, 2001, 08:15 PM
  1. iboats Forum Directory - Over 100,000 forum posts organized by topic