Boomyal
Supreme Mariner
- Joined
- Aug 16, 2003
- Messages
- 12,072
both PB Blaster and Kroil are solvent based and not intended for anything other than freeing stuck things.
one I bent on the break press at work to fit in on G-ma's old Crown Vic
Yea, I did one on the Mrs's '88 Grand Marquis. I really do not remember where it was located but I ended up having to buy a split deep 7/8" socket to get to it. It was not all that hard to unscrew but the socket was the only thing I could get on it. I still have the socket but that does not help my SIL.
He cannot get a box end or open end wrench or pipe wrench on it and even if he broke the top off the sensor he would still need a deep socket to reach it.
He also has an access problem, even with the car up on ramps. I think he is going to take it to a local Firestone dealer and have them put it on the rack and break the sensor loose.
Last edited: